Table Of Contents
Introduction
OVERVIEW/CURRENT STATUS
Ceramic Fuel Cells
N.Q. Minh
J. Am. Ceram. Soc., Vol. 76, No. 3, 563--588, 1993
Worldwide SOFC Technology Overview and Benchmark
L. Blum
H. Nabielek
W.A. Meulenberg
R. Steinberger-Wilckens
Int'l. J.Appl. Ceram. Tech., Vol. 2, No. 6, p. 482-492, 2005
Ceramic Fuel Cells for Stationary and Mobile Applications
S. Singhal
Am. Ceram. Soc. Bull., Vol. 82, No. 11, p. 19--20, 2003
SOFCs---Too Hot to Handle?
H. Feuer
J. Margalit
Am. Ceram. Soc. Bull., Vol. 83, No. 7, p. 12--15, 2004
U.S. Department of Energy's Solid Oxide Fuel Cells: Technical Advances
M. Williams
J.P. Strakey
W.A. Surdoval
Int'l. J. Appl. Ceram. Tech., Vol. 2, No. 4, p. 295-300, 2005
Solid Oxide Fuel Cell Development at Forschungszentrum Juelich
L. Blum
H.-P. Buchkremer
L.G.J. de Haart
H. Nabielek
J.W. Quadakkers
U. Reisgen
R. Steinberger-Wilckens
R.W. Steinbrech
F. Tietz
I. Vinke
Ceram. Eng. Sci. Proc., Vol. 25, No. 3, 219-227, 2004
Solid Oxide Fuel Cells: Technology Status
P. Singh
N.Q. Minh
Int. J. Appl. Ceram. Tech., Vol. I, No. I, p. 5--15, 2004
SOFCo Planar Solid Oxide Fuel Cell
L.A. Xue
E.A. Barringer
T.L. Cable
R.W. Goettler
K.E. Kneidel
Int. J. Appl. Ceram. Tech., Vol. I, No. I p. 16-22, 2004
Solid-State Ionics: Roots, Status, and Future Prospects
P. Knauth
H.L. Tuller
J. Am. Ceram. Soc., Vol. 85, No. 7, p. 1654--1680, 2002
Processing and Fabrication
Manufacturing Solid Oxide Fuel Cells for the Sulzer Hexis Stationary System
C. Voisard
Int. J. Appl. Ceram. Tech., Vol. I, No. I, p. 31--39, 2004
Low-Cost Manufacturing Processes for Solid Oxide Fuel Cells
M.M. Seabaugh
B.E. McCormick
K. Hasinska
C.T. Holt
S.L. Swartz
W.J. Dawson
Ceram.Trans., Vol. 127, Materials for Electrochemical Energy Conversion and Storage, p. 91--98, 2002
Manufacturing Routes and State-of-the-Art of the Planar Julich Anode-Supported Concept for Solid Oxide Fuel Cells
W.A. Meulenberg
N.H. Menzler
H.P. Buchkremer
D. Stover
Ceram.Trans., Vol. 127, Materials for Electrochemical Energy Conversion and Storage, p. 99--108, 2002
Fabrication and Properties of an Anode-Supported Tubular IT-SOFC Based on Lanthanum Gallate
N. Sammes
Y. Du
Ceram. Eng. Sci. Proc., Vol. 26, No. 4, p. 33--40, 2005
Single-Step Co-Firing Technique for SOFC Fabrication
G. Ye
F. Ju
C. Lin
S. Gopalan
U. Pal
D. Seccombe
Ceram. Eng. Sci. Proc., Vol. 26, No. 4, p. 25-32, 2005
The Co-sintering of Electrode and Electrolyte Layered Structures for SOFC Applications
T. Garino
Ceram. Eng. Sci. Proc., Vol. 23, No. 3, p. 759--765, 2002
Materials and Microstructures for Improved Solid Oxide Fuel Cells
S. Huss
R. Doshi
J. Guan
G. Lear
K. Montgomery
N. Minh
E. Ong
Ceram.Trans., Vol. 127, Materials for Electrochemical Energy Conversion and Storage, p. 109--116, 2002
Design Criteria for SOFC Generators
D. Stolten
L.G.J. de Haart
L. Blum
Ceram. Eng. Sci. Proc., Vol. 24, No. 3, p. 263--272, 2003
Electrolytes
Novel Composite Electrolytes for Solid Oxide Fuel Cell Applications
R.J. Ball
R. Stevens
Ceram. Eng. Sci. Proc., Vol. 23, No. 3, p. 751-758, 2002
Lanthanum Gallate Electrolyte for Intermediate-Temperature SOFC Operation
S. Elangovan
B. Heck
S. Balagopal
D. Larsen
M. Timper
J. Hartvigsen
Ceram. Eng. Sci. Proc., Vol. 25, No. 3, p. 213--217, 2004
Anodes
Development of Solid Oxide Fuel Cell Anodes Using Metal-Coated Pore-Forming Agents
S.F. Corbin
X. Qiao
J.Am. Ceram. Soc., Vol. 86, No. 3, p. 401--406, 2003
High Purity H2/H2O/Nickel/Stabilized Zirconia Electrodes at 500°C
J. Hogh
K. Vels Hansen
I. Chorkendorff
T. Jacobsen
K. Norrman
M. Mogensen
Ceram. Eng. Sci. Proc., Vol. 26, No. 4, p. 159--168, 2005
Impregnation of Nickel Foils with Nanocrystalline Ceria as Anodes for Solid Oxide Fuel Cells
S. Kuehn
J. Tabellion
R. Clasen
Ceram. Eng. Sci. Proc., Vol. 24, No. 3, p. 305--310, 2003
Cathodes
Study of Praseodyium Strontium Manganite for the Potential Use as a Solid Oxide Fuel Cell Cathode
M.E. Pfluge
M.C. Deibert
G.W. Coffey
L.R. Pederson
Ceram. Eng. Sci. Proc., Vol. 26, No. 4, p. 121-128, 2005
Chromium Poisoning Effects on Various Cathodes
J.Y. Kim
N.L. Canfield
L.A. Chick
K.D. Meinhardt
V.L. Sprenkle
Ceram. Eng. Sci. Proc., Vol. 26, No. 4, p. 129-138, 2005
Single Chamber Solid Oxide Fuel Cell---Investigation of Cathodes
P. Jasinski
T. Suzuki
X.D. Zhou
F. Dogan
H.U. Anderson
Ceram. Eng. Sci. Proc., Vol. 24, No. 3, p. 293-298, 2003
Microstructure and Electroconductivity Studies of (La,Sr)(Cr,Mn,Co)O3
S. Ozcan
R. Koc
Ceram. Trans., Vol. 161, Developments in Solid Oxide Fuel Cells and Lithium Ion Batteries, p. 13--20, 2005
Microstructure--Performance Relationships in LSM--YSZ Cathodes
J.A. Ruud
T. Striker
V. Midha
B.N. Ramamurthi
A.L. Linsebigler
D.J. Fogelman
Ceram. Eng. Sci. Proc., Vol. 25, No. 3, p. 251-256, 2004
Role of Cathode in Single-Chamber SOFC
T. Suzuki
P. Jasinski
F. Dogan
H.U. Anderson
Ceram. Eng. Sci. Proc., Vol. 25, No. 3, p. 257--261, 2004
Ceramic and Metal Interconnects
Lanthanum Chromite-Based Interconnects as Key Materials for SOFC Stack Development
N. Sakai
H. Yokokawa
T. Horita
K. Yamaji
Int. J. Appl. Ceram. Tech., Vol. I, No. I, p. 23--30, 2004
Structural Characterization of Lanthanum Chromite Perovskite Coating Deposited by Magnetron Sputtering on an Iron-Based Chromium-Containing Alloy as a Promising Interconnect Material for SOFCs
N. Orlovskaya
A. Coratolo
C. Johnson
R. Gemmen
J. Am. Ceram. Soc., Vol. 87, No. 10, p. 1981--1987, 2004
Surface Modification on Ferritic and Ni Based Alloys for Improved Oxidation Resistance in SOFC Applications
P.D. Jablonski
D.E. Alman
S.C. Kung
Ceram. Eng. Sci. Proc., Vol. 26, No. 4, p. 193-200, 2005
Ferritic Stainless Steel SOFC Interconnects with Thermally Grown (Mn,Co)3O4 Spinel Protection Layers
Z. Yang
G. Xia
S.P. Simner
J.W. Stevenson
Ceram. Eng. Sci. Proc., Vol. 26, No. 4, p. 201-208, 2005
Chemical Reaction Behavior between Glass-Ceramic Sealants and High Chromium Ferritic Steels Under Various SOFC Conditions
S.M. Gross
T. Koppitz
N.H. Menzler
Ceram. Eng. Sci. Proc., Vol. 26, No. 4, p. 209-216, 2005
Electrical Contacts between Cathodes and Metallic Interconnects in Solid Oxide Fuel Cells
Z. Yang
G. Xia
J.W. Stevenson
Ceram. Eng. Sci. Proc., Vol. 26, No. 4, p. 217-224, 2005
Seal Materials and Concepts
Evaluation of Sealing Glasses for Solid Oxide Fuel Cells
R.E. Loehman
H.P. Dumm
H. Hofer
Ceram. Eng. Sci. Proc., Vol. 23, No. 3, p. 699--705, 2002
Suitable Glass-Ceramic Sealant for Planar Solid-Oxide Fuel Cells
S.-B. Sohn
S.-Y. Choi
G.-H. Kim
H.-S. Song
G.-D. Kim
J.Am. Ceram. Soc., Vol. 87, No. 2, p. 254--60, 2004
Glass-Ceramic Materials of the System BaO-CaO-SiO2 as Sealants for SOFC Applications
S.-M. Gross
T. Koppitz
J. Remmel
U. Reisgen
Ceram. Eng. Sci. Proc., Vol. 26, No. 4, p. 239-245, 2005
Layered Composite Seals for Solid Oxide Fuel Cells (SOFC)
R.N. Singh
S.S. Parihar
Ceram. Eng. Sci. Proc., Vol. 26, No. 4, p. 247--255, 2005
Development of Amorphous, Non-oxide Seals for Solid Oxide Fuel Cells
C.A. Lewinsohn
S. Elangovan
Ceram. Eng. Sci. Proc., Vol. 24, No. 3, p. 317--322, 2003
Alternative Methods of Sealing Planar Solid Oxide Fuel Cells
K.S. Weil
C.A. Coyle
J.S. Hardy
J.Y. Kim
G.-G. Xia
Ceram. Trans., Vol. 161, Developments in Solid Oxide Fuel Cells and Lithium Ion Batteries, p. 79--87, 2005
Glass Mica Composite Seals for Solid Oxide Fuel Cells
Y.-S. Chou
J.W. Stevenson
P. Singh
Ceram. Eng. Sci. Proc., Vol. 26, No. 4, p. 257-264, 2005
Long-Term Thermal Cycling of Phlogopite Mica-Based Compressive Seals for Solid Oxide Fuel Cells
Y.-S. Chou
J.W. Stevenson
Ceram. Trans., Vol. 161, Developments in Solid Oxide Fuel Cells and Lithium Ion Batteries, p. 69--78, 2005
Mechanical Properties
Mechanical Properties of SOFC Seal Glass Composites
S.R. Choi
N.P. Bansal
Ceram. Eng. Sci. Proc., Vol. 26, No. 4, p. 275-283, 2005
Fracture Energies of Brittle Sealants for Planar Solid Oxide Fuel Cells
J. Malzbender
R.W. Steinbrech
L. Singheiser
P. Batfalsky
Ceram. Eng. Sci. Proc., Vol. 26, No. 4, p. 285-291, 2005
Failure Probability of Solid Oxide Fuel Cells
J. Malzbender
R.W. Steinbrech
L. Singheiser
Ceram. Eng. Sci. Proc., Vol. 26, No. 4, p. 293-298, 2005
A Numerical Simulation Tool for Fracture Analysis in Solid Oxide Fuel Cells
J. Johnson
J. Qu
Ceram. Eng. Sci. Proc., Vol. 26, No. 4, p. 307-314, 2005
Strength and Fracture Toughness of YSZ/Alumina Composites for Solid Oxide Fuel Cells
S.R. Choi
N.P. Bansal
Ceram. Eng. Sci. Proc., Vol. 23, No. 3, p. 741--750, 2002
Elastic Properties of Nickel-Based Anodes for Solid Oxide Fuel Cells as a Function of the Fraction of Reduced NiO
M. Radovic
E. Lara-Curzio
J. Am. Ceram. Soc., Vol. 87, No. 12, p. 2242--2246, 2004
Elastic Properties, Biaxial Strength, and Fracture Toughness of Nickel-Based Anode Materials for Solid Oxide Fuel Cells
M. Radovic
E. Lara-Curzio
B. Armstrong
C. Walls
Ceram. Trans., Vol. 161, Developments in Solid Oxide Fuel Cells and Lithium Ion Batteries, p. 31--40, 2005
Effect of Hydrogen Reduction on the Microstructure and Elastic Properties of Ni-Based Anodes for SOFCs
M. Radovic
E. Lara-Curzio
B. Armstrong
P. Tortorelli
L. Walker
Ceram. Trans., Vol. 161, Developments in Solid Oxide Fuel Cells and Lithium Ion Batteries, p. 41--50, 2005
Characterization/Testing
Electrochemical Characterization of Vacuum Plasma Sprayed Planar Solid Oxide Fuel Cells and Short Stacks for Mobile Application
M. Lang
A. Dresel
T. Franco
Z. Ilhan
A. Nestle
G. Schiller
P. Szabo
Ceram. Eng. Sci. Proc., Vol. 26, No. 4, p. 67-74, 2005
Single Cell Testing and Performance Analysis of Planar Solid Oxide Fuel Cells
M. Antloga
R. Goettler
K. Kneidel
L. Xue
Ceram. Eng. Sci. Proc., Vol. 26, No. 4, p. 75-82, 2005
Long-Term SOFC Stability with Coated Ferritic Stainless Steel Interconnect
S.P. Simner
M.D. Anderson
G.-G. Xia
Z. Yang
J.W. Stevenson
Ceram. Eng. Sci. Proc., Vol. 26, No. 4, p. 83-90, 2005
Effects of the Use of Pore Formers on Performance of an Anode-Supported Solid Oxide Fuel Cell
J.J. Haslam
A.-Q. Pham
B.W. Chung
J.F. DiCarlo
R.S. Glass
J.Am. Ceram. Soc., Vol. 88, No. 3, 513--518, 2005
Formation of Secondary Phases at the Interface between Strontium-Doped Lanthanum Manganite and Yttria-Stabilized Zirconia
C.-C.T. Yang
W.-C.J. Wei
A. Roosen
H.P. Buchkremer
Ceram. Eng. Sci. Proc., Vol. 23, No. 3, p. 733--740, 2002
Modeling
Development of a Tri-layer Electrochemical Model for a Solid Oxide Fuel Cell
B. Ramamurthi
V. Midha
J. Ruud
M. Thompson
Ceram. Eng. Sci. Proc., Vol. 25, No. 3, p. 381--386, 2004
Fuel Reforming
Multilayered Ceramic Reactor for the Steam Reforming of Methanol into Hydrogen-Enriched Gas
D. Gervasio
S. Rogers
R. Koripella
S. Tasic
D. Zindel
R. Changrani
C.K. Dyer
J. Hallmark
D. Wilcox
Ceram. Trans., Vol. 127, Materials for Electrochemical Energy Conversion and Storage, p. 157--166, 2002
Activity and Structure of Perovskites as Diesel Reforming Catalysts for Solid Oxide Fuel Cell
D. Liu
M. Krumpelt
Int. J. Appl. Ceram.Tech., Vol. 2, No. 4, p. 301--307, 2005
新书报道